On YouTube: episode 12 and episode 13.
Hydro Turbine tutorials and videos: designing a small hydro plant
HELICIEL HydroTurbineThe films of the series, one page per video:
- Episode 12: A Kaplan turbine for a small hydro site
- Episode 13: A Kaplan turbine from a specification, driven by artificial intelligence (AI) prompts
You have a head and a flow, and you want to know which turbine to install, and with which structure around it?
The HydroTurbine option adds the Hydro Turbine design workshop to Heliciel: from the site data (gross head, flow, penstock), it chooses the turbine family by specific speed, sizes the guide vane distributor and the spiral casing, the draft tube, and balances the Kaplan runner computed by the Heliciel BEM method (Blade Element Momentum). It draws the installation in 2D and 3D, plots the piezometric graph and prepares the fabrication kit.
With these tutorials
and videos
, you will carry out your first complete study, from the site to the runner sent to the Heliciel designer.
Essential to get started:
The episode 12 film (10 min 22): a small hydro plant of 4 m head and 12 m³/s, driven by hand, tab by tab (player above).
Hydro Turbine design: the user guide of the workshop, the whole workshop, with a link to each tab.
Tutorial: micro Kaplan turbine in a penstock, a 238 mm runner for 2.5 m net head and 120 l/s, step by step.
Water turbine types: Pelton, Francis, Kaplan, to know which turbine suits your head before opening the workshop.
To read
The hydro turbine tutorials:
Theory first if you are new to turbines, or straight to the design tutorials if you already have a site to equip.
|
Understanding the Kaplan turbine
The propeller or Kaplan turbine system, from the site to the generator.
The relation between the distributor and the runner, and its effect on efficiency.
A simplified design method, from the site to the runner geometry. Designing a small hydro plant
The components, the turbine types, the site power and the power produced.
The distributor geometry and its relation with the Kaplan runner.
Choosing the sections and sizing the draft tube.
A 238 mm runner for 2.5 m net head and 120 l/s: rpm, power and blade geometry. |
Specific speed, statistics, spiral casing, distributor, draft tube and piezometric line.
Height of the runner outlet, penstock head loss and site power.
Choosing between Pelton, Francis and Kaplan.
With or without a spiral casing, and the allowable velocity for the material.
Axis circle, guide vane profile and head losses.
And sending the turbine to the Heliciel project in penstock mode.
Length, outlet section and automatic sizing.
Balancing the runner on the head, distributor opening and flow.
The head split between losses and runner, from the site to the shaft.
Top view, dimensioned vertical view, 3D design and exploded view.
Developed drawings and STL export of the parts.
Dimensions extrapolated from the specific speed.
See also: |
To watch
Videos:
The videos play in the player at the top of the page (choose the video in the player list). Files can be downloaded below; English and French subtitles are on YouTube.
List of videos:
| Video | Duration | Language | Files |
|---|---|---|---|
| 10 min 22 | English (French version) | MP4 (69 MB) · YouTube | |
| 6 min 38 | English (French version) | MP4 (52 MB) · YouTube |
E12: A Kaplan turbine for a small hydro site. A site of 4 m gross head and 12 m³/s, driven by hand in the workshop: specific speed and Kaplan range, spiral casing and distributor, guide vane opening controlling the flow, the two balancing solvers (imposed 1,700 mm runner: 371 kW; full sizing: 1,868 mm runner, 391 kW, no cavitation), draft tube, piezometric graph, 3D installation, fabrication kit and the runner sent to the project.
- 0:00 Introduction
- 0:50 The site and the penstock
- 1:41 Specific speed: is it a Kaplan?
- 3:05 Spiral casing and distributor
- 3:46 The guide vanes control the flow
- 4:55 Solver 1: an imposed runner
- 5:47 Solver 2: the full sizing
- 7:07 Draft tube and piezometric graph
- 7:49 Results and cavitation diagnostic
- 8:15 The installation in 3D
- 9:01 Fabrication kit and Heliciel project
- 10:00 Conclusion
E13: A Kaplan turbine by AI prompts. The same site, this time with six prompts to a locally connected AI assistant: the turbine family (Ns 659, Kaplan), a runner limited to 1,700 mm, the full sizing, the installation in 3D, the kit exported as STL and the runner sent to the project. Very useful for beginners who are not turbine experts.
- 0:00 The finished turbine and its exploded view
- 1:18 Prompts for beginners
- 1:41 The conversation window
- 1:53 Prompt 1: the site, which turbine?
- 2:46 Prompt 2: a runner limited to 1,700 mm
- 3:40 Prompt 3: the full sizing
- 4:35 Prompt 4: the installation in 3D
- 5:01 Prompt 5: the fabrication kit
- 5:30 Prompt 6: the runner in the Heliciel project
- 6:14 Conclusion

Global site map
Mecaflux
Tutorials Mecaflux Pro3D
Tutorials Heliciel
Tutorials Heliciel PRO CFD
Mecaflux Store
Compare software functions
Quotes, Orders, Payment Methods
project technical studies