Heliciel · Shop Français

Wind turbine rotors to 3D print

Reference: H-diameter in mm-number of blades p, then the blade shape: S skew (20°), Z serrated trailing edge, R rounded tips. Example: H-2860-3p-SZ = 2,860 mm, 3 blades, skew and serrated edge.

STL and STEP files of wind turbine rotors: home and off-grid wind turbines from 2.86 to 5.5 m, a 9 m small professional wind turbine, large three-blade 27 and 126 m rotors, the wind turbine model supplied with Heliciel, and 1 m rotors including a slow multi-blade rotor for water pumping.

Each rotor of the range is computed by Heliciel at the published rated wind speed of a machine of the same diameter, at the best-efficiency speed found by the software, with the NACA 64A410 airfoil and optimal chords; its page gives the power, torque, power coefficient and structural check. Each rotor comes with straight or 20° skewed blades, and with a smooth or serrated trailing edge: the serration is geometry only, its performance is that of the smooth blade.

The files are at the machine's real size: scale the large rotors down for a scale model.

To create your own custom model and test its performance: Heliciel software

The first model of each category is free: test the import and the quality of the files. One free model per person per day.

Other models

Home and off-grid wind turbines (2.86 to 5.5 m)

49 models

Wind turbine rotor 2.86 m, 2 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 600 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
2860 mm
Number of blades
2
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 2 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 600 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
2860 mm
Number of blades
2
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 2 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 600 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
2
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 2 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 600 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
2
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 550 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
2860 mm
Number of blades
3
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 550 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
2860 mm
Number of blades
3
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 550 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
3
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 550 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
3
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 5 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 5.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
2860 mm
Number of blades
5
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 5 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 5.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
2860 mm
Number of blades
5
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 5 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 5.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
5
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 5 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 5.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
5
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 7 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
2860 mm
Number of blades
7
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 7 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
2860 mm
Number of blades
7
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 7 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
7
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 2.86 m, 7 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial two-blade home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
2860 mm
Number of blades
7
Hub diameter
443.2 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 2 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
3500 mm
Number of blades
2
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 2 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
3500 mm
Number of blades
2
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 2 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
2
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 2 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 450 rpm (tip speed ratio 6.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
2
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 6.1), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
3500 mm
Number of blades
3
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 6.1), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
3500 mm
Number of blades
3
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 6.1), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
3
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 400 rpm (tip speed ratio 6.1), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
3
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 5 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 350 rpm (tip speed ratio 5.3), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
3500 mm
Number of blades
5
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 5 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 350 rpm (tip speed ratio 5.3), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
3500 mm
Number of blades
5
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 5 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 350 rpm (tip speed ratio 5.3), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
5
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 5 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 350 rpm (tip speed ratio 5.3), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
5
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 7 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
3500 mm
Number of blades
7
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 7 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
3500 mm
Number of blades
7
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 7 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
7
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 3.5 m, 7 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial home wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
3500 mm
Number of blades
7
Hub diameter
542.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 4 m, 3 blades (Heliciel model)

Model designed and computed with the Heliciel software. Design point: 5.5 m/s wind, 166.8 rpm (tip speed ratio 6.35), design point of the wind turbine model supplied with Heliciel. Heliciel's reference wind turbine model: NACA 64A410 airfoil, linear chords from 10 % to 2.5 % of the diameter.

Diameter
4000 mm
Number of blades
3
Hub diameter
620 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 2 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 7.2), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
5500 mm
Number of blades
2
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 2 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 7.2), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
5500 mm
Number of blades
2
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 2 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 7.2), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
2
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 2 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 300 rpm (tip speed ratio 7.2), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
2
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 250 rpm (tip speed ratio 6.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
5500 mm
Number of blades
3
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 250 rpm (tip speed ratio 6.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
5500 mm
Number of blades
3
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 250 rpm (tip speed ratio 6.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
3
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 250 rpm (tip speed ratio 6.0), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
3
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 5 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
5500 mm
Number of blades
5
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 5 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
5500 mm
Number of blades
5
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 5 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
5
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 5 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
5
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 7 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
5500 mm
Number of blades
7
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 7 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
5500 mm
Number of blades
7
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 7 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
7
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Wind turbine rotor 5.5 m, 7 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 200 rpm (tip speed ratio 4.8), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial off-grid wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
5500 mm
Number of blades
7
Hub diameter
852.4 mm
€30.00 incl. VATBuy

Small professional wind turbine (9 m)

16 models

Wind turbine rotor 9 m, 2 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
9000 mm
Number of blades
2
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 2 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
9000 mm
Number of blades
2
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 2 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
2
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 2 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
2
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
9000 mm
Number of blades
3
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
9000 mm
Number of blades
3
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
3
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
3
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 5 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 145.2 rpm (tip speed ratio 5.7), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
9000 mm
Number of blades
5
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 5 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 145.2 rpm (tip speed ratio 5.7), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
9000 mm
Number of blades
5
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 5 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 145.2 rpm (tip speed ratio 5.7), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
5
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 5 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 145.2 rpm (tip speed ratio 5.7), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 5 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
5
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 7 blades

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 118 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
9000 mm
Number of blades
7
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 7 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 118 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
9000 mm
Number of blades
7
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 7 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 118 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
7
Hub diameter
1395 mm
€30.00 incl. VATBuy

Wind turbine rotor 9 m, 7 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 118 rpm (tip speed ratio 4.6), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 7 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
9000 mm
Number of blades
7
Hub diameter
1395 mm
€30.00 incl. VATBuy

Large 27 and 126 m rotors

8 models

Wind turbine rotor 126 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 11.4 m/s wind, 8.64 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a NREL 5 MW public reference turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
126000 mm
Number of blades
3
Hub diameter
19530 mm
€30.00 incl. VATBuy

Wind turbine rotor 126 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 11.4 m/s wind, 8.64 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a NREL 5 MW public reference turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
126000 mm
Number of blades
3
Hub diameter
19530 mm
€30.00 incl. VATBuy

Wind turbine rotor 126 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 11.4 m/s wind, 8.64 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a NREL 5 MW public reference turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
126000 mm
Number of blades
3
Hub diameter
19530 mm
€30.00 incl. VATBuy

Wind turbine rotor 126 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 11.4 m/s wind, 8.64 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a NREL 5 MW public reference turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
126000 mm
Number of blades
3
Hub diameter
19530 mm
€30.00 incl. VATBuy

Wind turbine rotor 27 m, 3 blades

Model designed and computed with the Heliciel software. Design point: 14 m/s wind, 49.52 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a fixed-speed medium-power wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.

Diameter
27000 mm
Number of blades
3
Hub diameter
4185 mm
€30.00 incl. VATBuy

Wind turbine rotor 27 m, 3 blades, 20° skew

Model designed and computed with the Heliciel software. Design point: 14 m/s wind, 49.52 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a fixed-speed medium-power wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.

Diameter
27000 mm
Number of blades
3
Hub diameter
4185 mm
€30.00 incl. VATBuy

Wind turbine rotor 27 m, 3 blades, 20° skew, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 14 m/s wind, 49.52 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a fixed-speed medium-power wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
27000 mm
Number of blades
3
Hub diameter
4185 mm
€30.00 incl. VATBuy

Wind turbine rotor 27 m, 3 blades, serrated trailing edge

Model designed and computed with the Heliciel software. Design point: 14 m/s wind, 49.52 rpm (tip speed ratio 5.0), best-efficiency speed found by Heliciel at the published rated wind speed of a fixed-speed medium-power wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.

Diameter
27000 mm
Number of blades
3
Hub diameter
4185 mm
€30.00 incl. VATBuy

Frequently asked questions

How do I use a 27 or 126 m rotor?

The files are at the machine's real size. For a scale model, scale the STL in your software: the geometry stays similar, but the figures on the product page only hold at the size, wind speed and rpm of the computation, since the Reynolds number changes with scale.

What does the serrated trailing edge change?

The serration is geometry only, inspired by the comb-like blades that soften trailing-edge noise: the displayed performance is that of the smooth blade, as Heliciel computes aerodynamics, not acoustics.

How do I read the power coefficient Cp?

Cp is the share of the wind power crossing the disc that the rotor recovers, the Betz limit being 0.593. The page gives the Cp computed by Heliciel at the rated wind speed and best-efficiency rpm, and the calculator transposes it to another wind speed by similarity.

Which material should the blades be made of?

The page states the material and the structural check performed by Heliciel at the design point, in bending and centrifugal tension. A real rotor then needs a structural study, a brake and a control system: the large rotors are study geometries.

What is in the pack?

The complete model as a full-definition STL, STEP surfaces for CAD, the Heliciel .hlc project, the computation records and a description sheet. The download link is also sent by e-mail.

To go further on heliciel.com

Other categories : FPV drones · Aircraft, paramotors · Boats · Tidal turbines · Kaplan turbines · Fans · Water pumps

What you receive

A .zip archive: full-definition STL, STEP, Heliciel .hlc project and description sheet. The download link is also sent by e-mail.

Price and licence

Prices include 20 % French VAT. Personal use: resale and redistribution of the files are forbidden.

Safety

A propeller is a dangerous object, in particular because of the risk of bursting under centrifugal force. These files result from theoretical assumptions and are supplied without any guarantee of operation. These models must be tested and validated in conditions that cannot endanger human life; a propeller tested and validated by a professional may then be used.

Drag: rotate · Wheel or pinch: zoom

Buy