Wind turbines · Small professional wind turbine (9 m)
Wind turbine rotor 9 m, 3 blades, 20° skew, serrated trailing edge
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.
The pack contains the complete propeller as a full-definition STL with root fillet, the Heliciel .hlc project and the computation records. Serrated trailing edge: geometry only, no STEP; the stated performance and strength are computed on the smooth blade.
Characteristics computed by Heliciel
| Diameter | 9000 mm |
|---|---|
| Number of blades | 3 |
| Hub diameter | 1395 mm |
| Design speed | 150 rpm |
| Fluid speed at design point | 12 m/s |
| Axial load | 4907.77 N |
| Torque | 2113.166 N·m |
| Shaft power | 33194 W |
| Power coefficient Cp | 0.54 |
| Tip speed ratio (TSR) | 5.9 |
| Blade shape | skew 20°, optimal chords (Glauert), serrated trailing edge (2 tip elements, 10 teeth per element, 20 % of chord peak to peak ; geometry only) |
| Airfoil | NACA 64A410 (transition turbulente) |
| Angles of attack | smoothed (5° along the whole blade) |
| Bore | 279 mm |
| Hub length | 580 mm |
| Blade thickness | 88.1 mm at the root, 61.9 mm at mid-radius (r = 2218.5 mm), 22.5 mm at the tip |
| Material used in the computation | woven carbon/epoxy laminate |
| Strength at design point | yes |
| Direction of rotation | right-hand |
| Files included | STL, HLC |
| Reference | H-9000-3p-SZ |
Need a propeller for your own parameters?
This model was designed and computed with the Heliciel software. For a custom propeller there are two ways: the Heliciel software (Windows: computation, 3D view, STL and STEP exports), and the Heliciel MCP connector, which lets your AI assistant — ChatGPT, Claude, Le Chat and any MCP client — compute a real propeller, with a free 1-day discovery pass.
Similar models
Wind turbine rotor 9 m, 2 blades
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.
- Diameter
- 9000 mm
- Number of blades
- 2
- Hub diameter
- 1395 mm
Wind turbine rotor 9 m, 2 blades, 20° skew
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.
- Diameter
- 9000 mm
- Number of blades
- 2
- Hub diameter
- 1395 mm
Wind turbine rotor 9 m, 2 blades, 20° skew, serrated trailing edge
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.
- Diameter
- 9000 mm
- Number of blades
- 2
- Hub diameter
- 1395 mm
Wind turbine rotor 9 m, 2 blades, serrated trailing edge
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 190.99 rpm (tip speed ratio 7.5), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 2 blades, at the best-efficiency speed found by Heliciel among valid operating points; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. Serrated trailing edge on the two tip elements, near-equilateral teeth (20 % of chord peak to peak): geometry only, performance computed on the smooth blade.
- Diameter
- 9000 mm
- Number of blades
- 2
- Hub diameter
- 1395 mm
Wind turbine rotor 9 m, 3 blades
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model.
- Diameter
- 9000 mm
- Number of blades
- 3
- Hub diameter
- 1395 mm
Wind turbine rotor 9 m, 3 blades, 20° skew
Model designed and computed with the Heliciel software. Design point: 12 m/s wind, 150 rpm (tip speed ratio 5.9), best-efficiency speed found by Heliciel at the published rated wind speed of a commercial small professional wind turbine of the same diameter. NACA 64A410 airfoil and optimal Glauert chords for 3 blades, at the best-efficiency speed found by Heliciel; tip chord of at least 2.5 % of the diameter, as on Heliciel's wind turbine model. 20° skewed blades.
- Diameter
- 9000 mm
- Number of blades
- 3
- Hub diameter
- 1395 mm
Other categories : FPV drones · Aircraft, paramotors · Boats · Tidal turbines · Kaplan turbines · Fans · Water pumps