FPV drones · 5-inch freestyle
FPV freestyle drone propeller 5 in, 3 blades
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S.
The pack contains the complete propeller as a full-definition STL, STEP surfaces (complete propeller and one blade), the Heliciel .hlc project and the computation records. It also contains the same propeller turning the other way (STL and STEP).
Characteristics computed by Heliciel
| Diameter | 127 mm |
|---|---|
| Number of blades | 3 |
| Hub diameter | 19.6 mm |
| Pitch at 0.7 R | 67 mm (2.6 in) |
| Design speed | 18627 rpm |
| Fluid speed at design point | 0 m/s |
| Thrust | 4.78 N |
| Torque | 0.039 N·m |
| Shaft power | 76 W |
| Blade shape | classic |
| Angles of attack | smoothed (4° along the whole blade) |
| Blade root | junction shank 5.1 × 16.7 mm |
| Bore | 5 mm |
| Hub length | 8 mm |
| Blade thickness | 1.6 mm at the root, 1.7 mm at mid-radius (r = 31.3 mm), 0.4 mm at the tip |
| Material used in the computation | PA6, 30 % glass fibre |
| Strength at design point | yes |
| Direction of rotation | right-hand |
| Files included | STL, STEP, HLC |
| Reference | B-127-3p |
Need a propeller for your own parameters?
This model was designed and computed with the Heliciel software. For a custom propeller there are two ways: the Heliciel software (Windows: computation, 3D view, STL and STEP exports), and the Heliciel MCP connector, which lets your AI assistant — ChatGPT, Claude, Le Chat and any MCP client — compute a real propeller, with a free 1-day discovery pass.
Similar models
FPV freestyle drone propeller 5 in, 2 blades
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S.
- Diameter
- 127 mm
- Number of blades
- 2
- Hub diameter
- 19.6 mm
FPV freestyle drone propeller 5 in, 2 blades (20° skew)
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S. 20° skew: shape sought for noise (not measured).
- Diameter
- 127 mm
- Number of blades
- 2
- Hub diameter
- 19.6 mm
FPV freestyle drone propeller 5 in, 2 blades (winglets (6 % of radius, canted at 75°))
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S. 6 % radius winglets: their effect on tip losses follows Heliciel's model, not validated by testing.
- Diameter
- 127 mm
- Number of blades
- 2
- Hub diameter
- 19.6 mm
FPV freestyle drone propeller 5 in, 2 blades (serrated trailing edge)
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S. Serrated trailing edge: the stated performance is that of the smooth blade (serrations are not computed); pack without STEP file.
- Diameter
- 127 mm
- Number of blades
- 2
- Hub diameter
- 19.6 mm
FPV freestyle drone propeller 5 in, 3 blades (square constant-chord blade (heavy load))
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S. Square constant-chord blade (heavy load).
- Diameter
- 127 mm
- Number of blades
- 3
- Hub diameter
- 19.6 mm
FPV freestyle drone propeller 5 in, 3 blades (8° rake)
Model designed and computed with the Heliciel software. Design point: 18,627 rpm in hover, 50 % throttle on a 2207.5 1950 KV motor on 6S. 8° rake.
- Diameter
- 127 mm
- Number of blades
- 3
- Hub diameter
- 19.6 mm
Other categories : Aircraft, paramotors · Boats · Wind turbines · Tidal turbines · Kaplan turbines · Fans · Water pumps